Likely Red Oak; alternatives include White Oak or oak veneer.
Quercus rubra (probable); Quercus alba is a key alternative. · Hardwood; likely solid oak or oak-faced panel.
AI-generated identification · may be incorrect- Type
- Hardwood; likely solid oak or oak-faced panel.
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
- Hardness
- 1,290 lbf Janka; Hard.
- Durability
- Moderately durable; heartwood has moderate decay resistance, while sapwood is more vulnerable to insects and rot, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, vertical-looking grain consistent with plainsawn or riftsawn oak; no visible medullary-ray figure.
Color & Appearance
Medium tan to warm light brown with darker latewood streaks and subdued luster. Red oak commonly deepens slightly amber-brown with light exposure.
Hardness (Janka)
1,290 lbf Janka; Hard.
Durability & Decay Resistance
Moderately durable; heartwood has moderate decay resistance, while sapwood is more vulnerable to insects and rot, especially outdoors.
Value & Age
Approximately $5–$12 per board foot for clear, kiln-dried red oak; figured or wide premium stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated from this photograph; the surface appears relatively clean and modern, with little visible patina or wear.
Common Uses
Furniture, flooring, cabinetry, doors, trim, veneer, and general interior millwork.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
Workability
Machines and sands well, though open pores require filling for a smooth finish. Oak can show tearout and tends to split near edges; predrilling improves fastening.
Finish Recommendations
Sand progressively, optionally fill pores, then use oil, lacquer, shellac, or polyurethane. A conditioner or washcoat can reduce uneven absorption.
Notable Features
Distinctive open pores, strong latewood lines, and characteristic oak texture; rays may be more apparent on quarter-sawn surfaces.
