Most likely pine, possibly Douglas fir or another softwood; exact species cannot be confirmed from this face-grain photo.
Pinus spp. (tentative); alternatives include Pseudotsuga menziesii or Picea spp. · Softwood (gymnosperm/conifer).
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer).
- Origin
- Likely North American plantation or construction softwood; species origin could range across eastern or western North America.
- Hardness
- Approximately 380–870 lbf depending on pine species: Very Soft to Soft.
- Durability
- Slightly Durable to Non-durable; generally limited resistance to decay, insects, and weathering unless protected.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium texture, with subdued longitudinal growth lines; no visible figure. End grain is not shown, limiting identification.
Color & Appearance
Honey tan to light brown with fairly uniform color and modest luster; likely darkens slightly amber-brown with age and light.
Hardness (Janka)
Approximately 380–870 lbf depending on pine species: Very Soft to Soft.
Durability & Decay Resistance
Slightly Durable to Non-durable; generally limited resistance to decay, insects, and weathering unless protected.
Value & Age
About $2–$8 per board foot for common clear/select material; construction-grade stock is usually less.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated; the surface shows machining marks and scattered dents but little diagnostic patina, suggesting relatively recent or indoor-aged stock.
Common Uses
Framing, shelving, crates, trim, furniture parts, cabinetry, and general shop work.
Geographic Origin
Likely North American plantation or construction softwood; species origin could range across eastern or western North America.
Workability
Generally easy to cut, plane, sand, glue, and fasten; resin, knots, and soft areas can cause tear-out, crushing, or finish blotching.
Finish Recommendations
Sand evenly, seal with shellac or a wood conditioner to reduce blotching, then use oil, lacquer, shellac, or polyurethane.
Notable Features
Lightweight, resinous, and pale; visible small defects may be insect or handling damage rather than species-specific features.