Most likely red oak; alternatives include white oak or another ring-porous oak.
Quercus rubra (probable); Quercus alba is a plausible alternative. · Hardwood (deciduous); domestic North American species.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous); domestic North American species.
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and northeastern regions.
- Hardness
- Janka about 1,290 lbf—Hard.
- Durability
- Slightly durable to moderately durable; reasonable insect resistance when dry but not naturally rot-resistant outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Generally straight with prominent cathedral/flat-sawn figure, visible growth-ring bands, and occasional knots; the surface appears rough-sawn or heavily worked rather than finished.
Color & Appearance
Pale pinkish-tan to light brown heartwood with lighter sapwood and moderate variation; limited luster is visible. It typically mellows toward warmer brown with age and light.
Hardness (Janka)
Janka about 1,290 lbf—Hard.
Durability & Decay Resistance
Slightly durable to moderately durable; reasonable insect resistance when dry but not naturally rot-resistant outdoors.
Value & Age
Approximately US$4–10 per board foot for ordinary kiln-dried clear red oak; premium wide or figured stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; it appears recently machined, with no dependable patina or wear evidence.
Common Uses
Furniture, flooring, cabinetry, trim, veneer, boxes, and general construction; also suitable for turning and interior joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and northeastern regions.
Workability
Machines and sands well, though coarse grain, knots, and flat-sawn areas may cause tearout; it holds fasteners and glues reliably. Open pores require filling for a glass-smooth finish.
Finish Recommendations
Sand progressively, seal end grain, and use oil, shellac, lacquer, or polyurethane; grain filler is optional for a smoother surface.
Notable Features
Distinctive open pores and strong earlywood/latewood contrast; the knots and rough tooling marks obscure some diagnostic detail.
