Most likely white oak veneer; alternatives include red oak or ash.
Quercus alba (alternatives: Quercus rubra or Fraxinus spp.) · Hardwood; appearance suggests a sliced or rotary-cut veneer panel.
AI-generated identification · may be incorrect- Type
- Hardwood; appearance suggests a sliced or rotary-cut veneer panel.
- Origin
- Eastern and central North America, especially the eastern United States and southeastern Canada.
- Hardness
- White oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good decay and insect resistance, while sapwood is less resistant. Interior veneer is not itself a weathering indicator.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, elongated grain with cathedral-like variation and moderate ray visibility; no clear figured pattern.
Color & Appearance
Pale beige to light gray-brown with darker linear streaks and subdued luster. Oak typically warms slightly amber with age and light exposure.
Hardness (Janka)
White oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good decay and insect resistance, while sapwood is less resistant. Interior veneer is not itself a weathering indicator.
Value & Age
About $3–$10 per board foot for solid white oak; figured or premium veneer panels may vary substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from this image; the uniform surface and finish provide no reliable age or patina evidence.
Common Uses
Furniture, cabinetry, flooring, architectural panels, doors, barrels, trim, and veneer.
Geographic Origin
Eastern and central North America, especially the eastern United States and southeastern Canada.
Workability
Generally machines and sands well, though oak can show tearout and may blunt tools moderately. Pre-drilling is useful; gluing is usually straightforward.
Finish Recommendations
Light sanding followed by hardwax oil, penetrating oil, lacquer, shellac, or polyurethane; test first because oak can absorb finish unevenly.
Notable Features
Visible ray fleck is consistent with oak, though limited in this mostly plain-sawn-looking surface. The image does not show enough end grain for confirmation.