Most likely White Oak; alternatives include Red Oak or European Oak.
Quercus alba (likely); Quercus rubra or Quercus robur are alternatives. · Hardwood (deciduous); likely domestic North American oak.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous); likely domestic North American oak.
- Origin
- Eastern and central North America, especially the Appalachian and Midwest regions; European Oak is a possible alternative.
- Hardness
- White Oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good natural resistance to decay and insects, while sapwood is less resistant. Not enough evidence here to distinguish species confidently.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, tight, and coarse, with visible open earlywood pores and subtle cathedral variation suggesting plainsawn or mixed-sawn stock.
Color & Appearance
Pale tan to light brown heartwood with slightly lighter sapwood; moderate luster. It typically deepens to golden brown with age and light exposure.
Hardness (Janka)
White Oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good natural resistance to decay and insects, while sapwood is less resistant. Not enough evidence here to distinguish species confidently.
Value & Age
Approximately $6–$12 per board foot for clear, kiln-dried white oak; premium or figured stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or lightly aged; the image shows little patina, oxidation, or wear. The tree’s biological age cannot be estimated from this sample.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, trim, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian and Midwest regions; European Oak is a possible alternative.
Workability
Machines and sands well, though its hardness and open pores require sharp tools; quartered or figured pieces can tear out. Gluing and fastening are generally good.
Finish Recommendations
Sand carefully and use a pore filler for a glass-smooth surface; oil, lacquer, shellac, or polyurethane are suitable. Water-based finishes may raise the grain slightly.
Notable Features
Prominent open pores, strong structural performance, and attractive ray fleck when quarter-sawn; white oak is generally less porous than red oak.
