Most likely construction-grade spruce or fir; alternatives include pine or hemlock. The image alone is insufficient for confident species-level identification.
Likely Picea spp. or Abies spp.; possible Pinus spp. or Tsuga spp. · Softwood (gymnosperm/conifer), likely kiln-dried dimensional lumber.
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer), likely kiln-dried dimensional lumber.
- Origin
- Likely North America or Europe; spruce, fir, pine, and hemlock are widely plantation- and forest-grown there.
- Hardness
- Approximately 350–600 lbf Janka, Very Soft to Soft, depending on species.
- Durability
- Slightly Durable to Non-durable outdoors; generally susceptible to decay and insect attack when persistently wet.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium grain with indistinct earlywood/latewood bands; appears flat-sawn. No visible decorative figure.
Color & Appearance
Pale cream to light yellow-brown, with darker brown oxidation and manufacturing grime. Limited visible luster; exposed surfaces may amber modestly with light.
Hardness (Janka)
Approximately 350–600 lbf Janka, Very Soft to Soft, depending on species.
Durability & Decay Resistance
Slightly Durable to Non-durable outdoors; generally susceptible to decay and insect attack when persistently wet.
Value & Age
Approximately $2–$6 per board foot for ordinary surfaced construction stock; retail region and grade vary substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The wood appears relatively new; surface discoloration suggests handling or oxidation rather than reliable age evidence.
Common Uses
Framing, shelving, crates, interior trim, packaging, and general construction lumber.
Geographic Origin
Likely North America or Europe; spruce, fir, pine, and hemlock are widely plantation- and forest-grown there.
Workability
Generally easy to saw, drill, nail, glue, and sand, though soft fibers dent easily and resin or fuzzy grain may affect finishing.
Finish Recommendations
Sand progressively, seal porous end grain, and use stain-blocking conditioner before stain; paint, clear polyurethane, lacquer, or oil finishes are suitable.
Notable Features
Lightweight, low-density material with visible softwood fiber structure; no distinctive scent or figure is discernible.