Most likely eastern white pine; alternatives include sugar pine or another plantation-grown pine.
Pinus strobus (probable) · Softwood (conifer)
AI-generated identification · may be incorrect- Type
- Softwood (conifer)
- Origin
- Native to northeastern North America and the Great Lakes/Appalachian regions; widely plantation-grown elsewhere.
- Hardness
- 380 lbf Janka; Very Soft.
- Durability
- Non-durable to slightly durable outdoors; limited natural resistance to decay and insects, so exterior exposure requires protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine-to-medium textured grain with prominent earlywood/latewood bands; flat-sawn face shows subtle cathedral variation and occasional resin streaks.
Color & Appearance
Pale cream to light yellow heartwood and nearly white sapwood, with modest luster; it generally deepens to warm honey-gold with age and light.
Hardness (Janka)
380 lbf Janka; Very Soft.
Durability & Decay Resistance
Non-durable to slightly durable outdoors; limited natural resistance to decay and insects, so exterior exposure requires protection.
Value & Age
Approximately $3–$7 per board foot for clear, kiln-dried stock; common construction grade is often less.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears recently machined and unfinished; no reliable evidence of significant age or reclaimed patina.
Common Uses
Interior trim, furniture, shelving, cabinetry, doors, pattern stock, carving, and general construction.
Geographic Origin
Native to northeastern North America and the Great Lakes/Appalachian regions; widely plantation-grown elsewhere.
Workability
Very easy to cut, plane, sand, glue, nail, and screw, though it dents readily, can tear around knots, and may bleed resin.
Finish Recommendations
Sand carefully and use a conditioner or washcoat before stain to reduce blotching; clear lacquer, shellac, oil, or water-/oil-based polyurethane are suitable.
Notable Features
Lightweight, soft, resonant, and often aromatic; visible knots and resin streaks are typical of pine.
