Most likely White Oak; alternatives include Red Oak or Chestnut Oak. — Quercus alba (probable)

Most likely White Oak; alternatives include Red Oak or Chestnut Oak.

Quercus alba (probable) · Hardwood; domestic temperate species.

AI-generated identification · may be incorrect
Type
Hardwood; domestic temperate species.
Origin
Eastern and central North America, especially the Appalachian and Midwest regions.
Hardness
1,360 lbf Janka — Hard.
Durability
Durable; heartwood has good decay resistance and moderate insect resistance, while sapwood is less resistant.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, open-grained, flat-sawn board with cathedral-like growth patterns and pronounced medullary flecking; live edge retains bark.

Color & Appearance

Pale tan to light brown heartwood with lighter sapwood, moderate luster, and darker natural streaks. It generally ambers slightly with age and light.

Hardness (Janka)

1,360 lbf Janka — Hard.

Durability & Decay Resistance

Durable; heartwood has good decay resistance and moderate insect resistance, while sapwood is less resistant.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$14 per board foot for attractive kiln-dried live-edge White Oak; premium slabs may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
The board’s age cannot be established visually; it appears freshly milled or recently surfaced, with no meaningful patina.

Common Uses

Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, turning, and general construction.

Geographic Origin

Eastern and central North America, especially the Appalachian and Midwest regions.

Workability

Machines and glues well, though open pores require filling for a smooth finish; can develop tearout around irregular grain and requires careful predrilling.

Finish Recommendations

Sand progressively, optionally fill pores, then use penetrating oil, hardwax oil, shellac, lacquer, or polyurethane; seal end grain to reduce uneven absorption.

Notable Features

Visible ray fleck and open pores are characteristic of oak; the bark edge confirms a live-edge slab but not the exact oak species.

Learn more about Most likely White Oak; alternatives include Red Oak or Chestnut Oak. in the Wood Encyclopedia
Identified September 11, 2026