Most likely White Oak; alternatives include Red Oak or plain-sawn ash.
Quercus alba (probable); alternatives Quercus rubra or Fraxinus spp. · Hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood.
- Origin
- Eastern and central North America, especially the Appalachian and Midwest regions.
- Hardness
- White Oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good decay resistance, while sapwood is less resistant. Moderate insect resistance when dry.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium textured grain with subtle cathedral-like earlywood transitions; no strong ray figure is visible, suggesting a flat-sawn face.
Color & Appearance
Pale beige to light gray-brown with low contrast and mild natural luster; likely unfinished or lightly sanded. Oak generally warms modestly with age and light.
Hardness (Janka)
White Oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good decay resistance, while sapwood is less resistant. Moderate insect resistance when dry.
Value & Age
About $6–$12 per board foot for clear kiln-dried white oak; figured or premium grades cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably determinable from this clean, unfinished surface; it appears relatively new or recently prepared.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian and Midwest regions.
Workability
Machines and sands well, though interlocked areas can tear out; predrilling is useful and tannins may react with iron fasteners.
Finish Recommendations
Use a clear oil, lacquer, shellac, or polyurethane; water-pop or conditioner may improve color uniformity. Seal end grain carefully.
Notable Features
Open pores, strong wear resistance, and characteristic medullary rays that would be more apparent on quarter-sawn surfaces.