Most likely Eastern cottonwood or poplar; alternatives include willow or aspen. The image alone cannot confirm species.
Likely Populus deltoides; alternatives Populus tremuloides, Salix spp. · Hardwood (angiosperm/deciduous), apparently rough-sawn and possibly reclaimed.
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm/deciduous), apparently rough-sawn and possibly reclaimed.
- Origin
- Eastern and central North America are likely, especially bottomlands and river regions.
- Hardness
- Janka approximately 430 lbf—Very Soft.
- Durability
- Non-durable outdoors; limited resistance to rot, insects, and weathering unless protected.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, coarse and diffuse-textured grain with an occasional knot and mild irregularity; flat-sawn face, no distinctive figure visible.
Color & Appearance
Pale yellow-tan to light brown with darker streaks, knots, stains, and weathering; modest luster. It may yellow or darken slightly with age.
Hardness (Janka)
Janka approximately 430 lbf—Very Soft.
Durability & Decay Resistance
Non-durable outdoors; limited resistance to rot, insects, and weathering unless protected.
Value & Age
Approximately $1–$3 per board foot for ordinary rough lumber; figured or exceptionally clear stock may differ.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board’s age cannot be determined visually; staining and wear suggest storage or use for years, not necessarily old timber.
Common Uses
Crates, pallets, utility lumber, interior trim, painted furniture, carving, plywood cores, and lightweight construction components.
Geographic Origin
Eastern and central North America are likely, especially bottomlands and river regions.
Workability
Very easy to saw, plane, sand, glue, and nail, though it dents readily and can fuzz or tear around knots and dull edges.
Finish Recommendations
Sand progressively, seal end grain, and use paint, stain plus sealer, shellac, lacquer, or polyurethane; a conditioner may reduce uneven stain absorption.
Notable Features
Lightweight, low-density, relatively bland wood with prominent knots and occasional greenish-gray stain marks.