Most likely poplar (likely yellow-poplar/tulipwood); alternatives include basswood or soft maple.
Liriodendron tulipifera (probable); Tilia americana or Acer saccharinum are alternatives. · Hardwood; North American temperate species.
AI-generated identification · may be incorrect- Type
- Hardwood; North American temperate species.
- Origin
- Eastern and central North America, especially the Appalachian region and southeastern United States.
- Hardness
- Approximately 540 lbf Janka—Soft.
- Durability
- Non-durable to slightly durable; limited resistance to decay, insects, and outdoor weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and fairly uniform, with subtle diffuse-porous texture; no distinctive figure visible. Photograph shows face grain only, not end grain.
Color & Appearance
Very pale gray-white to creamy tan with faint greenish or pinkish streaks; low luster and minimal contrast. It typically darkens slightly toward warm yellow-brown with light exposure.
Hardness (Janka)
Approximately 540 lbf Janka—Soft.
Durability & Decay Resistance
Non-durable to slightly durable; limited resistance to decay, insects, and outdoor weathering.
Value & Age
About $2–$5 per board foot for clear, kiln-dried stock; figured or exceptionally wide boards may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, unfinished-looking surface; it appears relatively fresh or lightly weathered.
Common Uses
Paint-grade furniture, drawer sides, cabinetry, interior trim, carving, plywood cores, toys, and patternmaking.
Geographic Origin
Eastern and central North America, especially the Appalachian region and southeastern United States.
Workability
Very easy to cut, plane, rout, sand, glue, and nail, though its softness can dent and fuzzy fibers may require sharp tools and final sanding.
Finish Recommendations
Use sanding sealer followed by lacquer, shellac, or polyurethane; stain may absorb unevenly, so pre-sealing or gel stain is recommended.
Notable Features
Lightweight, fine-textured, dimensionally stable, and generally bland in appearance; often accepts paint exceptionally well.