Most likely White Oak; alternatives include Red Oak or European Oak.
Quercus alba (likely); Quercus rubra or Quercus robur are alternatives. · Hardwood; temperate North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American species.
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.
- Hardness
- White Oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable; good resistance to decay and weathering, with moderate-to-good insect resistance when properly maintained.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-grained, likely flat-sawn or mildly rift-sawn, with subtle cathedral pattern and dark mineral/streak figure.
Color & Appearance
Pale cream to light tan heartwood with slightly lighter sapwood; moderate luster. It typically ambers and darkens modestly with age and light.
Hardness (Janka)
White Oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; good resistance to decay and weathering, with moderate-to-good insect resistance when properly maintained.
Value & Age
Approximately $6–$14 per board foot for clear, kiln-dried White Oak; figured or premium wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears freshly milled or lightly aged; visible appearance cannot establish tree age or harvest date.
Common Uses
Furniture, flooring, cabinetry, millwork, barrels, veneer, interior trim, and boat construction.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and eastern woodland regions.
Workability
Machines and sands well, though open pores and occasional grain reversal can cause tear-out. Pre-drilling is advisable; glues and finishes reliably.
Finish Recommendations
Use a clear oil, lacquer, shellac, or polyurethane; sanding sealer or grain filler can improve smoothness. Test finishes because mineral streaks may absorb unevenly.
Notable Features
Distinctive open pores, strong structural performance, attractive ray fleck when quarter-sawn, and occasional mineral streaking.
