Likely red oak; alternatives include white oak or beech.
Quercus rubra (probable); Quercus alba is the main alternative. · Hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood.
- Origin
- Eastern and central North America, especially the Great Lakes, Appalachians, and southeastern Canada/United States.
- Hardness
- 1,290 lbf Janka — Hard.
- Durability
- Slightly Durable to Moderately Durable; heartwood has limited rot and insect resistance, while sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium textured, with long cathedral-like bands suggesting flat-sawn stock; no obvious figure.
Color & Appearance
Pale pinkish tan to light reddish-brown, with subtle darker growth lines and low-to-moderate luster. Red oak typically deepens slightly toward warm amber-brown with light exposure.
Hardness (Janka)
1,290 lbf Janka — Hard.
Durability & Decay Resistance
Slightly Durable to Moderately Durable; heartwood has limited rot and insect resistance, while sapwood is less resistant.
Value & Age
Approximately US$4–$8 per board foot for clear kiln-dried retail stock; regional grade and thickness may change this substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably determined from this clean, apparently fresh board; it shows little patina or wear.
Common Uses
Furniture, cabinetry, flooring, millwork, paneling, veneer, and general interior construction.
Geographic Origin
Eastern and central North America, especially the Great Lakes, Appalachians, and southeastern Canada/United States.
Workability
Generally machines, sands, glues, and finishes well, though open pores and possible tear-out require sharp cutters. Pre-drilling is advisable for fasteners.
Finish Recommendations
Use sanding sealer or grain filler for a smoother surface, followed by oil, shellac, lacquer, or polyurethane. Test stain first because oak can color unevenly.
Notable Features
Open-pored anatomy and prominent growth-ring contrast are typical of oak; the image does not show enough end grain for confirmation.
