Most likely hard maple (possibly silver maple); exact identification is uncertain from face grain alone.
Acer saccharum (hard/sugar maple); alternative Acer saccharinum. · Hardwood; temperate North American species.
AI-generated identification · may be incorrect- Type
- Hardwood; temperate North American species.
- Origin
- Eastern and central North America; sugar maple is common in the northeastern United States and southeastern Canada.
- Hardness
- 1,450 lbf Janka for sugar maple—Hard. Silver maple is softer, about 950 lbf—Medium.
- Durability
- Slightly durable to non-durable outdoors; limited natural resistance to decay and insects, so it is primarily an interior wood.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and close-grained with subtle wavy streaks and mild cathedral variation; no clear figured pattern.
Color & Appearance
Pale cream to light gray-beige with barely darker heartwood, subdued luster, and occasional mineral-like streaking. It may yellow slightly with age and light exposure.
Hardness (Janka)
1,450 lbf Janka for sugar maple—Hard. Silver maple is softer, about 950 lbf—Medium.
Durability & Decay Resistance
Slightly durable to non-durable outdoors; limited natural resistance to decay and insects, so it is primarily an interior wood.
Value & Age
Approximately $5–$12 per board foot for clear kiln-dried maple, varying by region, thickness, and grade.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or lightly aged; no reliable patina, wear, or oxidation indicators are visible. Board age cannot be determined from this image.
Common Uses
Furniture, cabinetry, flooring, butcher-block surfaces, turning, craftwork, and musical instruments.
Geographic Origin
Eastern and central North America; sugar maple is common in the northeastern United States and southeastern Canada.
Workability
Machines, sands, glues, and finishes well, though hard maple can dull tools and burn during routing or sanding; predrilling is recommended.
Finish Recommendations
Use a clear water- or oil-based polyurethane, lacquer, or hardwax oil. Sand evenly and condition or seal first if an especially uniform color is desired.
Notable Features
Fine, uniform texture and clean pale appearance; the image shows no distinctive odor or strong figure.