Likely White Oak; alternatives include Red Oak or European Oak. — Quercus alba (possible Quercus rubra or Quercus robur).

Likely White Oak; alternatives include Red Oak or European Oak.

Quercus alba (possible Quercus rubra or Quercus robur). · Hardwood.

AI-generated identification · may be incorrect
Type
Hardwood.
Origin
Eastern and central North America; comparable European Oak occurs across Europe and western Asia.
Hardness
White Oak: approximately 1,360 lbf Janka—Hard.
Durability
Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and outdoor exposure requires protection.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Mostly straight, fine-to-medium texture, apparently flat-sawn with subtle cathedral pattern; no prominent figure visible.

Color & Appearance

Pale cream to light tan heartwood with lighter sapwood and modest pink-brown variation; limited luster, likely to amber slightly with age and light.

Hardness (Janka)

White Oak: approximately 1,360 lbf Janka—Hard.

Durability & Decay Resistance

Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and outdoor exposure requires protection.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for clear, kiln-dried commercial stock; regional prices vary.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from this fresh, unfinished appearance; it shows little visible patina or weathering.

Common Uses

Furniture, flooring, cabinetry, architectural millwork, barrels, veneer, and general construction.

Geographic Origin

Eastern and central North America; comparable European Oak occurs across Europe and western Asia.

Workability

Machines and sands well, though pronounced pores can cause tear-out and require sharp tools; glues, screws, and finishes reliably.

Finish Recommendations

Sand evenly, fill pores if a smooth surface is desired, then use oil, shellac, lacquer, or polyurethane; water-based finishes may raise the grain.

Notable Features

Open-pored structure, visible growth-ring contrast, substantial weight, and characteristic oak ray fleck when quarter-sawn.

Learn more about Likely White Oak; alternatives include Red Oak or European Oak. in the Wood Encyclopedia
Identified September 9, 2026