Most likely pine, possibly lodgepole pine or ponderosa pine; species-level identification from this image is uncertain.
Pinus spp.; likely Pinus contorta or Pinus ponderosa · Softwood (conifer), likely a live-edge cross-section
AI-generated identification · may be incorrect- Type
- Softwood (conifer), likely a live-edge cross-section
- Origin
- Likely western or northern North America; pine species are also widely plantation-grown elsewhere.
- Hardness
- Approximately 350–620 lbf Janka, ranging from Very Soft to Soft depending on pine species.
- Durability
- Slightly Durable; untreated pine has limited resistance to decay, insects, and weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight, fine-to-medium grain with prominent annual growth rings and mild ring-porous-looking contrast typical of resinous softwood; no evident decorative figure.
Color & Appearance
Pale cream to light yellow-brown heartwood and sapwood with darker ring bands; moderate natural luster. It generally yellows and deepens to honey-brown with light exposure.
Hardness (Janka)
Approximately 350–620 lbf Janka, ranging from Very Soft to Soft depending on pine species.
Durability & Decay Resistance
Slightly Durable; untreated pine has limited resistance to decay, insects, and weathering.
Value & Age
About $2–$8 per board foot for ordinary pine; attractive small live-edge pieces may retail higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The sample appears freshly cut or recently prepared; visible age of the tree cannot be determined without counting rings, and the bark shows no reliable artifact-aging evidence.
Common Uses
Framing, shelving, furniture, crates, carving, turning, rustic décor, and live-edge slabs.
Geographic Origin
Likely western or northern North America; pine species are also widely plantation-grown elsewhere.
Workability
Generally easy to saw, plane, sand, glue, nail, and screw, though resin can gum blades and tools; soft grain may dent and tear around knots.
Finish Recommendations
Sand progressively, seal resinous knots with shellac, then use oil, lacquer, or polyurethane; pre-conditioning or a wash coat helps reduce blotchy stain absorption.
Notable Features
Distinctive resinous scent, lightweight feel, visible growth-ring contrast, and rough, scaly bark retained around the edge.