Most likely pale red oak or white oak veneer; red oak is slightly more likely. Alternatives include ash or birch.
Quercus rubra (probable); alternatively Quercus alba, Fraxinus spp., or Betula spp. · Hardwood; likely veneer-faced engineered panel or thin solid board.
AI-generated identification · may be incorrect- Type
- Hardwood; likely veneer-faced engineered panel or thin solid board.
- Origin
- Eastern and central North America; commonly manufactured and sold throughout North America.
- Hardness
- Red oak: 1,290 lbf, Hard; white oak: 1,360 lbf, Hard.
- Durability
- Red oak: Slightly Durable; white oak: Durable, with better moisture resistance. Insect and decay resistance cannot be confirmed visually.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium texture with subtle linear cathedral/rift-sawn figure; no distinctive decorative figure visible.
Color & Appearance
Very pale tan to pinkish-beige with low contrast and mild natural luster; oak typically darkens slightly amber with light exposure.
Hardness (Janka)
Red oak: 1,290 lbf, Hard; white oak: 1,360 lbf, Hard.
Durability & Decay Resistance
Red oak: Slightly Durable; white oak: Durable, with better moisture resistance. Insect and decay resistance cannot be confirmed visually.
Value & Age
Approximately $3–8 per board foot for common clear oak; veneer or panel value varies by construction and grade.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, lightly finished-looking surface; it appears relatively new or recently machined.
Common Uses
Furniture, cabinetry, flooring, trim, veneer, interior millwork, and general joinery.
Geographic Origin
Eastern and central North America; commonly manufactured and sold throughout North America.
Workability
Generally machines, sands, glues, and fastens well, though oak can show tear-out and may blunt tools moderately. End-grain inspection is needed for confirmation.
Finish Recommendations
Sand progressively to 180–220 grit; use stain conditioner or washcoat if staining, then apply oil, lacquer, shellac, or polyurethane.
Notable Features
Visible pores and straight grain are consistent with oak, but the image lacks a clear end-grain view and distinctive medullary-ray detail.