Most likely Monterey pine; alternatives include ponderosa pine or other urban pine.
Pinus radiata (probable) · Softwood (gymnosperm/conifer)
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer)
- Origin
- Native to coastal central California and Baja California; widely planted in California, Australia, New Zealand, Chile, and South Africa.
- Hardness
- Janka approximately 570 lbf — Soft.
- Durability
- Slightly Durable; untreated wood generally has limited resistance to decay, insects, and weathering.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Straight to mildly irregular grain; coarse texture and prominent growth rings visible on the bark and freshly cut limbs. No evidence of decorative figure or saw orientation.
Color & Appearance
Fresh wood appears pale cream to yellowish tan with darker reddish-brown heartwood; it typically darkens and yellows modestly with light exposure. Bark is thick, gray-brown and deeply furrowed.
Hardness (Janka)
Janka approximately 570 lbf — Soft.
Durability & Decay Resistance
Slightly Durable; untreated wood generally has limited resistance to decay, insects, and weathering.
Value & Age
Approximately $2–$5 per board foot for ordinary dry pine; specialty clear stock may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The tree appears mature, but the sample’s age cannot be determined from a photograph; fresh cuts indicate recent removal.
Common Uses
Framing, utility lumber, crates, pulp, interior trim, furniture, and plantation timber; occasionally carving or turning.
Geographic Origin
Native to coastal central California and Baja California; widely planted in California, Australia, New Zealand, Chile, and South Africa.
Workability
Generally easy to saw, plane, sand, glue, nail, and screw, though resin can gum tools and cause blotchy staining. Knots and reaction wood may produce tearout or distortion.
Finish Recommendations
Seal knots and resinous areas, then use shellac or a stain-blocking primer before paint; clear varnish, lacquer, or polyurethane also works. Preconditioning helps reduce blotchy stain absorption.
Notable Features
Resinous scent, relatively light weight, conspicuous knots, and rapid growth-ring variation are characteristic. The image shows bark and branch stubs rather than diagnostic end grain.
