Likely red oak; alternatives include white oak or reclaimed oak flooring.
Quercus rubra (most likely); Quercus alba possible. · Hardwood; likely reclaimed or heavily worn solid oak.
AI-generated identification · may be incorrect- Type
- Hardwood; likely reclaimed or heavily worn solid oak.
- Origin
- Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
- Hardness
- Red oak: about 1,290 lbf Janka—Hard; white oak: about 1,360 lbf—Hard.
- Durability
- Red oak is Slightly Durable outdoors; white oak is Moderately Durable. Both have good insect resistance when dry but are not ideal for prolonged weather exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, open-pored grain with prominent cathedral/flat-sawn figure and occasional irregular ray or knot-like figure; end grain is not visible.
Color & Appearance
Honey-tan to medium brown with darker grain lines and localized gray/amber oxidation. Oak typically darkens and develops warmer patina with age and light, while the broad rays may show modest luster.
Hardness (Janka)
Red oak: about 1,290 lbf Janka—Hard; white oak: about 1,360 lbf—Hard.
Durability & Decay Resistance
Red oak is Slightly Durable outdoors; white oak is Moderately Durable. Both have good insect resistance when dry but are not ideal for prolonged weather exposure.
Value & Age
Approximately US$4–10 per board foot for ordinary surfaced oak; reclaimed or select material may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The surface appears substantially worn and oxidized, suggesting decades of use, but board age cannot be reliably determined from this face alone.
Common Uses
Flooring, furniture, cabinetry, millwork, trim, veneer, barrels, and general construction.
Geographic Origin
Eastern and central North America, especially the Appalachian, Great Lakes, and eastern U.S. regions.
Workability
Machines and sands well, though open pores and occasional tearout require sharp cutters. Glues and finishes reliably; predrilling is useful for screws.
Finish Recommendations
Clean and sand progressively, fill pores if a smooth surface is desired, then apply oil, shellac, lacquer, or polyurethane; test for uneven absorption.
Notable Features
Distinctive open pores, strong cathedral grain, visible medullary-ray fleck, and moderate-to-high density.
