Most likely Eastern White Pine; alternatives include Sugar Pine or another light-colored softwood.
Pinus strobus · Softwood (gymnosperm/conifer)
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer)
- Origin
- Eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Janka approximately 380 lbf — Very Soft.
- Durability
- Non-durable to slightly durable; limited resistance to decay, insects, and weathering when unfinished outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine grain with prominent earlywood/latewood bands, small knots, and a modest knot-related swirl; likely flat-sawn.
Color & Appearance
Very pale cream to light yellow-brown heartwood and nearly white sapwood, with subdued luster. It gradually yellows and darkens with light exposure.
Hardness (Janka)
Janka approximately 380 lbf — Very Soft.
Durability & Decay Resistance
Non-durable to slightly durable; limited resistance to decay, insects, and weathering when unfinished outdoors.
Value & Age
Approximately $3–$8 per board foot for clear retail stock; ordinary knotty material may be less.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears relatively new, with bright unfinished surfaces and little oxidation; its chronological age cannot be determined visually.
Common Uses
Interior trim, furniture, shelving, cabinetry, pattern stock, carving, crates, and general construction lumber.
Geographic Origin
Eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Cuts, planes, sands, glues, and screws easily, though its softness causes dents and compression; resin pockets and knots can cause tear-out or uneven finishing.
Finish Recommendations
Sand carefully, seal knots with shellac or a stain-blocking sealer, then use clear lacquer, polyurethane, or oil. Preconditioning helps reduce blotchy stain absorption.
Notable Features
Lightweight, low-density wood with visible growth bands and occasional resinous knots; the image lacks enough end-grain detail for confirmation.