Most likely rift- or quarter-sawn White Oak; alternatives include Red Oak or ash.
Quercus alba (probable); alternatives Quercus rubra or Fraxinus spp. · Hardwood (angiosperm); domestic North American species.
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm); domestic North American species.
- Origin
- Eastern and central North America, especially the Appalachian, Midwest, and eastern forest regions.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good decay resistance and moderate insect resistance, though sapwood is less resistant.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Very straight, narrow, vertically oriented grain with prominent ray flecking/medullary figure, consistent with rift or quarter sawing; no notable decorative figure.
Color & Appearance
Pale beige to light tan, with subtle gray-brown variation and low-to-moderate luster. It typically warms slightly amber with age and light exposure.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good decay resistance and moderate insect resistance, though sapwood is less resistant.
Value & Age
Approximately US$6–12 per board foot for clear, well-selected rift/quarter-sawn stock; retail figured or wide boards may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this finished face; it appears relatively clean and recently surfaced, without definitive patina or wear evidence.
Common Uses
Furniture, flooring, cabinetry, architectural panels, barrels, interior trim, and boatbuilding.
Geographic Origin
Eastern and central North America, especially the Appalachian, Midwest, and eastern forest regions.
Workability
Machines and sands well, though interlocked areas can tear out; predrilling is useful, and tannins may react with iron fasteners or finishes.
Finish Recommendations
Use a clear waterborne or oil-based polyurethane, lacquer, or hardwax oil; condition/sand evenly to prevent blotching and avoid iron contamination.
Notable Features
Distinctive linear ray figure, strong tannin content, good dimensional stability, and characteristic oak medullary fleck.
