Likely White Oak end-grain butcher-block/parquet panel; alternatives include Red Oak or European Oak.
Most likely Quercus alba; alternatives Quercus rubra or Quercus robur. · Hardwood; likely engineered end-grain construction from solid blocks.
AI-generated identification · may be incorrect- Type
- Hardwood; likely engineered end-grain construction from solid blocks.
- Origin
- White Oak: eastern and central North America; Red Oak: eastern North America; European Oak: Europe and western Asia.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
- Durability
- Durable, particularly White Oak; good natural resistance to decay and insects when heartwood is present, though end grain absorbs moisture readily.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Highly varied end-grain orientation, showing prominent growth rings, cathedral-like arcs, medullary-ray fleck, and occasional irregular figure; not a single continuous grain.
Color & Appearance
Pale tan to light brown with darker brown ring lines and occasional gray-brown blocks. Oak typically darkens mildly and warms with light exposure; current surface appears unfinished or lightly worn.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard. Red Oak is about 1,290 lbf.
Durability & Decay Resistance
Durable, particularly White Oak; good natural resistance to decay and insects when heartwood is present, though end grain absorbs moisture readily.
Value & Age
Approximately $8–20 per board foot for clear White Oak; finished end-grain panels may retail higher, roughly $15–40 per board foot.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot reliably determine from the photograph; it appears relatively new, with no strong patina or wear evidence.
Common Uses
Butcher blocks, flooring, furniture, cabinetry, worktops, veneer, barrels, and interior millwork.
Geographic Origin
White Oak: eastern and central North America; Red Oak: eastern North America; European Oak: Europe and western Asia.
Workability
Generally machines well but is hard on tools; end grain requires sharp cutters and careful sanding. Strongly holds fasteners and glues well, though open pores may need filling.
Finish Recommendations
Use a penetrating hardwax oil or film finish such as polyurethane after thorough sanding and edge sealing; apply thin coats because end grain absorbs finish unevenly.
Notable Features
Visible large pores, prominent annual rings, and ray fleck strongly support oak identification. End-grain orientation provides high wear resistance and dimensional visual variety.
