Most likely lacewood; possible Australian silky oak or plane/sycamore with strong flecking
Likely Panopsis rubescens (commercial lacewood); alternatives: Grevillea robusta or Acer pseudoplatanus · Hardwood; lacewood is commonly marketed as an exotic/tropical hardwood
AI-generated identification · may be incorrect- Type
- Hardwood; lacewood is commonly marketed as an exotic/tropical hardwood
- Origin
- Commercial lacewood is mainly sourced from South America; silky oak alternatives originate in eastern Australia
- Hardness
- Approximately 1,100 lbf Janka; Medium, though values vary substantially by species sold as lacewood
- Durability
- Slightly Durable to Moderately Durable; generally better for interior use than prolonged outdoor exposure
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Distinctive dense, horizontal-to-diagonal flecking and quilted/“lace” figure, likely from quarter-sawn or rift-sawn stock; grain appears fine and interlocked rather than plainly straight
Color & Appearance
Warm honey-brown to reddish tan with darker flecks and moderate natural luster; typically deepens slightly toward brown-red with light exposure
Hardness (Janka)
Approximately 1,100 lbf Janka; Medium, though values vary substantially by species sold as lacewood
Durability & Decay Resistance
Slightly Durable to Moderately Durable; generally better for interior use than prolonged outdoor exposure
Value & Age
Approximately $10–25 per board foot for clear figured stock; exceptional veneer-grade material may cost more
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this image; it appears clean and relatively fresh, without convincing patina or wear
Common Uses
Decorative furniture, cabinet panels, veneer, musical-instrument backs, turning, and accent trim
Geographic Origin
Commercial lacewood is mainly sourced from South America; silky oak alternatives originate in eastern Australia
Workability
Generally machines and sands well, though figure may cause localized tearout; predrill fasteners and use sharp cutters
Finish Recommendations
Seal with shellac or a thinned first coat, then apply clear lacquer, oil, or polyurethane; sanding to 180–220 grit helps reveal the figure
Notable Features
The prominent lace-like ray figure is the defining feature; moderate weight and attractive reflective chatoyance are typical
