Most likely Eastern White Pine; alternatives include other North American white pines or radiata pine.
Pinus strobus (likely) · Softwood (gymnosperm/conifer)
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer)
- Origin
- Eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Janka approximately 380 lbf — Very Soft.
- Durability
- Slightly Durable; generally vulnerable to decay, insects, and weathering when unfinished or exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, fine, even grain with a prominent small knot and mild cathedral pattern; flat-sawn board.
Color & Appearance
Very pale cream to light yellow heartwood and nearly white sapwood, with subtle reddish-brown knot contrast. Low luster; gradually yellows and darkens with light exposure.
Hardness (Janka)
Janka approximately 380 lbf — Very Soft.
Durability & Decay Resistance
Slightly Durable; generally vulnerable to decay, insects, and weathering when unfinished or exposed outdoors.
Value & Age
Approximately US$2–$5 per board foot for common clear or knotty stock, varying by region, grade, and dimensions.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or recently installed, with little oxidation, patina, or wear; actual tree age cannot be determined visually.
Common Uses
Interior trim, furniture, shelving, cabinetry, paneling, boxes, and general construction; also common for painted projects.
Geographic Origin
Eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Very easy to cut, plane, sand, glue, and fasten, though its softness permits dents and compression. Resin pockets and knots may cause tearout or dulling and can bleed through finishes.
Finish Recommendations
Sand progressively and seal knots with a stain-blocking primer or shellac before paint. For clear work, use shellac, lacquer, polyurethane, or oil; preconditioning helps reduce blotchy stain absorption.
Notable Features
Lightweight, resinous, dimensionally stable, and easily recognizable by its pale color and scattered knots.
