Most likely White Oak; alternatives include European Oak or Ash.
Quercus alba (likely); European Oak is Quercus robur. · Hardwood; likely flat-sawn or rift/combination-sawn lumber.
AI-generated identification · may be incorrect- Type
- Hardwood; likely flat-sawn or rift/combination-sawn lumber.
- Origin
- Eastern and central North America; comparable appearance may also indicate European oak from Europe.
- Hardness
- Janka approximately 1,360 lbf—Hard.
- Durability
- Durable; white oak heartwood has good resistance to decay and insects, especially compared with many domestic hardwoods.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, moderately coarse grain with subtle cathedral-like variation and faint ray figure; no prominent decorative figure visible.
Color & Appearance
Pale tan to light brown heartwood with slightly lighter sapwood, modest luster, and even coloration. It typically darkens gently to golden brown with age and light.
Hardness (Janka)
Janka approximately 1,360 lbf—Hard.
Durability & Decay Resistance
Durable; white oak heartwood has good resistance to decay and insects, especially compared with many domestic hardwoods.
Value & Age
Approximately US$6–12 per board foot for clear surfaced White Oak; figured or exceptional stock can cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or relatively new; the image shows little patina, oxidation, or wear, so board age cannot be established.
Common Uses
Flooring, furniture, cabinetry, architectural millwork, stairs, barrels, veneer, and general construction.
Geographic Origin
Eastern and central North America; comparable appearance may also indicate European oak from Europe.
Workability
Generally machines, sands, glues, and finishes well, though its hardness can blunt tools and open-pored grain may require filling. Pre-drilling is advisable for fasteners.
Finish Recommendations
Use penetrating oil, hardwax oil, lacquer, shellac, or polyurethane; grain filler gives a smoother surface. Test finishes because oak can absorb unevenly.
Notable Features
Distinctive oak rays may show more clearly on quarter-sawn faces; characteristic open pores and substantial weight are typical.
