Most likely beech; alternatives include hard maple or sycamore.
Fagus grandifolia (American beech) · Hardwood (deciduous), likely domestic; not confidently identifiable from one face-grain photograph.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous), likely domestic; not confidently identifiable from one face-grain photograph.
- Origin
- Eastern North America, especially the northeastern and Appalachian regions.
- Hardness
- 1,300 lbf Janka; Hard.
- Durability
- Slightly durable; generally susceptible to moisture-related decay and insect attack when exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and close-textured with subtle diffuse figure; appears plain-sawn or lightly rift-sawn. No clear curl, bird’s-eye, spalting, or prominent cathedral figure.
Color & Appearance
Pale cream to pinkish-tan with minimal heartwood/sapwood contrast, subdued luster, and a smooth, even appearance. It typically deepens slightly toward warm amber with age and light.
Hardness (Janka)
1,300 lbf Janka; Hard.
Durability & Decay Resistance
Slightly durable; generally susceptible to moisture-related decay and insect attack when exposed outdoors.
Value & Age
Approximately $5–$10 per board foot for clear kiln-dried beech; specialty figured stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not determinable from the image; the clean, unfinished-looking surface shows little reliable aging evidence.
Common Uses
Furniture, chairs, flooring, cabinetry, workbenches, turnings, toys, veneer, and tool components.
Geographic Origin
Eastern North America, especially the northeastern and Appalachian regions.
Workability
Machines and sands well, though it can warp or move with moisture changes; predrilling is useful and gluing is generally reliable.
Finish Recommendations
Apply sanding sealer or conditioner as needed, then use oil, shellac, lacquer, or polyurethane; water-based finishes may raise the grain.
Notable Features
Dense, fine texture; strong steam-bending performance and good wear resistance. End-grain pores are not visible here, limiting confirmation.