Most likely ebonized or heavily stained oak; alternatives include ash or beech with a dark finish. The image alone cannot reliably identify species.
Likely Quercus spp.; exact species undetermined. · Hardwood; apparently solid, possibly reclaimed or workshop-finished.
AI-generated identification · may be incorrect- Type
- Hardwood; apparently solid, possibly reclaimed or workshop-finished.
- Origin
- Unknown; oak could originate in eastern North America or Europe.
- Hardness
- If oak: about 1,290 lbf (Hard); species cannot be confirmed from this view.
- Durability
- If white oak, Durable; if red oak, Moderately Durable. Finish condition prevents a dependable rating.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, tight grain with faint cathedral-like bands and visible longitudinal pores; appearance is obscured by dark coating and abrasion. No clear special figure is visible.
Color & Appearance
Surface is charcoal-black to gray with silvery rubbed highlights, consistent with ebonizing, paint, or heavy oxidation rather than natural heartwood color.
Hardness (Janka)
If oak: about 1,290 lbf (Hard); species cannot be confirmed from this view.
Durability & Decay Resistance
If white oak, Durable; if red oak, Moderately Durable. Finish condition prevents a dependable rating.
Value & Age
Typical oak: approximately $5–$12 per board foot retail, depending on grade and provenance; finished reclaimed pieces vary widely.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not determinable; surface wear suggests use, but finish age and wood age may differ.
Common Uses
Furniture, trim, cabinetry, flooring, handles, and turned work; likely a finished component rather than identifiable raw lumber.
Geographic Origin
Unknown; oak could originate in eastern North America or Europe.
Workability
Likely machines and sands well if oak, though coating may clog abrasives; predrilling is advisable for fasteners.
Finish Recommendations
Remove or test the existing coating before refinishing; use sanding sealer followed by oil, lacquer, or polyurethane after confirming compatibility.
Notable Features
Visible linear grain and strong dark surface patina; no reliable scent, pore, or end-grain evidence is shown.