Most likely rift- or quarter-sawn White Oak; possible European Oak or Ash.
Quercus alba (likely); alternatives Quercus robur or Fraxinus americana. · Hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood.
- Origin
- Eastern and central North America, especially the Appalachian and eastern United States; European Oak alternatives originate in Europe.
- Hardness
- White Oak: approximately 1,360 lbf Janka—Hard.
- Durability
- Durable: heartwood has good resistance to decay and insects, though sapwood is less resistant; exterior performance still depends on finish and exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Very straight, fine-to-medium textured grain with subtle linear ray fleck; appears rift/quarter-sawn rather than flat-sawn. No prominent decorative figure.
Color & Appearance
Pale beige to light gray-brown with subdued luster and fairly uniform color; heartwood may warm slightly amber-brown with age and light exposure.
Hardness (Janka)
White Oak: approximately 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable: heartwood has good resistance to decay and insects, though sapwood is less resistant; exterior performance still depends on finish and exposure.
Value & Age
Approximately US$6–12 per board foot for clear, kiln-dried White Oak; premium quarter-sawn material may exceed this.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably estimated from this clean, unfinished face; it shows little distinctive patina or wear and may be new stock.
Common Uses
Furniture, flooring, cabinetry, architectural millwork, veneer, barrels, and general joinery.
Geographic Origin
Eastern and central North America, especially the Appalachian and eastern United States; European Oak alternatives originate in Europe.
Workability
Machines and sands well, with moderate effort; quartered stock is stable but can blunt tools somewhat and may require careful drilling and fastening.
Finish Recommendations
Use a sanding sealer followed by oil, hardwax oil, lacquer, or polyurethane; water-based finishes preserve the pale color, while oil warms it.
Notable Features
Open-pored oak structure, visible but restrained rays, good dimensional stability in quarter-sawn form, and characteristic tannin content.
