Most likely flat-sawn Douglas-fir; alternatives include western hemlock or another light softwood. — Pseudotsuga menziesii

Most likely flat-sawn Douglas-fir; alternatives include western hemlock or another light softwood.

Pseudotsuga menziesii · Softwood (conifer)

AI-generated identification · may be incorrect
Type
Softwood (conifer)
Origin
Native to western North America, especially the Pacific Northwest and interior western regions.
Hardness
Janka approximately 660 lbf; Soft.
Durability
Slightly durable: limited natural resistance to decay, insects, and prolonged weather exposure.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, vertical grain with subtle cathedral variation; no prominent figure visible. The image shows face grain only, not end grain.

Color & Appearance

Pale pinkish-brown to tan heartwood with lighter sapwood and low-to-moderate luster; it typically darkens slightly amber-brown with age.

Hardness (Janka)

Janka approximately 660 lbf; Soft.

Durability & Decay Resistance

Slightly durable: limited natural resistance to decay, insects, and prolonged weather exposure.

Value & Age

Estimated Market ValueNot an official valuation

Approximately US$2–6 per board foot for common clear or appearance-grade stock; highly variable by grade and region.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Not reliably determinable from this image; the clean surface and limited patina suggest recently milled or lightly aged material.

Common Uses

Framing, structural lumber, trim, doors, cabinetry, furniture, flooring, plywood, and general construction.

Geographic Origin

Native to western North America, especially the Pacific Northwest and interior western regions.

Workability

Machines and sands well, though resin and alternating hardness can cause tearout or fuzzy surfaces; predrilling is useful near edges. Glues and finishes readily.

Finish Recommendations

Sand evenly, seal porous earlywood, then use oil, lacquer, shellac, or polyurethane; a conditioner or sealer can reduce blotching.

Notable Features

Lightweight, strong for its weight, and commonly displays pronounced earlywood/latewood contrast and a characteristic resinous scent.

Learn more about Most likely flat-sawn Douglas-fir; alternatives include western hemlock or another light softwood. in the Wood Encyclopedia
Identified September 11, 2026