Most likely painted or primed softwood, probably pine or spruce; species cannot be confirmed from this image.
Likely Pinus spp. or Picea spp. · Softwood; apparently coated/painted, possibly a manufactured trim board.
AI-generated identification · may be incorrect- Type
- Softwood; apparently coated/painted, possibly a manufactured trim board.
- Origin
- Could originate from North America or Europe; pine and spruce are widely cultivated and commercially distributed.
- Hardness
- Likely 380–690 lbf Janka: Very Soft to Soft, depending on pine or spruce species.
- Durability
- Slightly Durable to Non-durable untreated; vulnerable to decay and insects outdoors, though coating can reduce moisture exposure.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Very straight, fine, parallel grain with low figure; face grain appears planed and covered by an opaque white coating. End grain is not visible.
Color & Appearance
Surface is uniform white/gray from paint or primer, obscuring natural heartwood, sapwood, and luster; underlying wood may be pale cream to yellow-white.
Hardness (Janka)
Likely 380–690 lbf Janka: Very Soft to Soft, depending on pine or spruce species.
Durability & Decay Resistance
Slightly Durable to Non-durable untreated; vulnerable to decay and insects outdoors, though coating can reduce moisture exposure.
Value & Age
Approximately $1–$4 per board foot for ordinary painted softwood; specialty trim may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not determinable; the coating and lack of wear suggest a relatively recent, manufactured piece rather than visibly aged lumber.
Common Uses
Interior trim, painted furniture, shelving, cabinetry components, molding, and general construction boards.
Geographic Origin
Could originate from North America or Europe; pine and spruce are widely cultivated and commercially distributed.
Workability
Generally easy to cut, plane, sand, glue, nail, and screw; soft fibers can dent, splinter, or fuzz during sanding.
Finish Recommendations
Lightly scuff-sand, repair defects, and apply compatible primer and acrylic or alkyd topcoat; seal exposed end grain carefully.
Notable Features
Straight, fine texture and pale substrate are consistent with spruce or white pine, but coating conceals diagnostic details.