Likely White Oak; alternatives include Red Oak or Chestnut Oak — Quercus alba; alternatives Quercus rubra or Quercus montana

Likely White Oak; alternatives include Red Oak or Chestnut Oak

Quercus alba; alternatives Quercus rubra or Quercus montana · Hardwood

AI-generated identification · may be incorrect
Type
Hardwood
Origin
Eastern and central North America, especially the Appalachian and Midwest regions.
Hardness
1,360 lbf Janka — Hard
Durability
Durable; heartwood has good decay resistance and generally good insect resistance, though sapwood is less resistant.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, moderately coarse grain with subtle cathedral/flat-sawn figure and visible medullary flecking near the edge.

Color & Appearance

Pale tan to light brown heartwood with slightly lighter sapwood; moderate luster. It typically darkens modestly to golden brown with age and light.

Hardness (Janka)

1,360 lbf Janka — Hard

Durability & Decay Resistance

Durable; heartwood has good decay resistance and generally good insect resistance, though sapwood is less resistant.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $6–$12 per board foot for ordinary kiln-dried White Oak; figured or exceptionally clear stock may cost more.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
The board appears freshly milled or lightly weathered; no reliable age can be assigned from this image.

Common Uses

Furniture, flooring, cabinetry, interior trim, barrels, veneer, and general construction.

Geographic Origin

Eastern and central North America, especially the Appalachian and Midwest regions.

Workability

Machines and sands well, but can show tearout on figured or flat-sawn areas and may blunt tools moderately. It glues, screws, and finishes reliably.

Finish Recommendations

Use sanding sealer followed by oil, lacquer, shellac, or polyurethane; water-based finishes may raise the grain and should be preceded by careful preparation.

Notable Features

Distinctive open pores, strong tannin content, attractive ray fleck when quarter-sawn, and substantial weight.

Learn more about Likely White Oak; alternatives include Red Oak or Chestnut Oak in the Wood Encyclopedia
Identified September 11, 2026