Most likely Red Oak; alternatives include White Oak or oak-look engineered veneer. — Quercus rubra (likely); Quercus alba is an alternative.

Most likely Red Oak; alternatives include White Oak or oak-look engineered veneer.

Quercus rubra (likely); Quercus alba is an alternative. · Hardwood; possibly veneered engineered board.

AI-generated identification · may be incorrect
Type
Hardwood; possibly veneered engineered board.
Origin
Eastern and central North America, especially the United States and southern Canada.
Hardness
1,290 lbf Janka; Hard.
Durability
Slightly Durable to Moderately Durable; heartwood has limited-to-moderate rot resistance, while sapwood is vulnerable to insects and decay.

Got a wood sample like this?

Identify any wood from a photo, free.

Identify wood

Grain Pattern

Predominantly straight, open-pored grain with conspicuous cathedral figure, suggesting flat-sawn oak; no evident medullary-ray fleck.

Color & Appearance

Pale pinkish tan to light brown with darker longitudinal grain; relatively low luster and likely to amber modestly with age and light.

Hardness (Janka)

1,290 lbf Janka; Hard.

Durability & Decay Resistance

Slightly Durable to Moderately Durable; heartwood has limited-to-moderate rot resistance, while sapwood is vulnerable to insects and decay.

Value & Age

Estimated Market ValueNot an official valuation

Approximately $4–$10 per board foot for clear kiln-dried red oak; veneer or finished panel value differs substantially.

AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.

Wood Age Estimate
Cannot be reliably estimated from the image; the surface appears relatively new or lightly aged, without strong patina or wear indicators.

Common Uses

Furniture, flooring, cabinetry, millwork, veneer, doors, and interior paneling.

Geographic Origin

Eastern and central North America, especially the United States and southern Canada.

Workability

Generally machines, sands, glues, and finishes well, though open pores require filling for a smooth surface and planing may cause localized tearout.

Finish Recommendations

Use sanding sealer or pore filler, then oil, lacquer, shellac, or polyurethane; water-based finishes may emphasize grain contrast and raise the grain initially.

Notable Features

Distinctive open pores and cathedral grain are characteristic of oak; the image does not show enough detail to confirm rays or end-grain anatomy.

Learn more about Most likely Red Oak; alternatives include White Oak or oak-look engineered veneer. in the Wood Encyclopedia
Identified August 31, 2026