Likely Douglas-fir; alternatives include ponderosa pine or another aged conifer.
Pseudotsuga menziesii · Softwood
AI-generated identification · may be incorrect- Type
- Softwood
- Origin
- Native to western North America, especially the Pacific Northwest and interior mountain regions.
- Hardness
- About 620 lbf Janka — Soft.
- Durability
- Slightly Durable; heartwood has limited decay resistance, while sapwood is vulnerable to rot and insects, especially outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, with pronounced annual growth rings; the rough bark and cross-sectional ring pattern indicate small conifer logs, likely cut nearly perpendicular to the trunk.
Color & Appearance
Heartwood is orange-red to reddish brown, surrounded by broad yellow-tan sapwood. Weathering has darkened the bark and exposed surfaces; moderate natural luster, little decorative figure.
Hardness (Janka)
About 620 lbf Janka — Soft.
Durability & Decay Resistance
Slightly Durable; heartwood has limited decay resistance, while sapwood is vulnerable to rot and insects, especially outdoors.
Value & Age
Approximately $3–$8 per board foot for ordinary kiln-dried lumber; rustic or clear grades may differ substantially.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The tree’s age cannot be reliably determined from the photograph; visible rings suggest a mature stem, while the cut material appears recently exposed and weathered.
Common Uses
Framing, beams, flooring, doors, trim, plywood, utility lumber, and pulp; also suitable for rustic craft pieces.
Geographic Origin
Native to western North America, especially the Pacific Northwest and interior mountain regions.
Workability
Machines, glues, sands, and fastens readily, though resin, knots, and localized grain can cause tear-out or blade buildup.
Finish Recommendations
Sand progressively, seal resinous knots, then use penetrating oil, stain, lacquer, or polyurethane; samples may need thorough cleaning before finishing.
Notable Features
Distinctive coarse bark and strong earlywood/latewood contrast; commonly resinous and lightweight for its strength.
