Most likely White Oak; alternatives include other oak species, especially Red Oak.
Quercus alba (probable; exact oak species cannot be confirmed visually) · Hardwood
AI-generated identification · may be incorrect- Type
- Hardwood
- Origin
- Eastern and central North America, especially the eastern United States and adjacent Canada.
- Hardness
- Approximately 1,360 lbf Janka — Hard.
- Durability
- Durable; generally good resistance to decay and insects, particularly when heartwood is used, though exposed end grain requires protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent, coarse, ring-porous grain with large earlywood pores, medullary rays, and irregular flat-sawn/crotch-like figure. The bowl blank shows substantial tear-out and live-edge irregularity.
Color & Appearance
Pale tan to light brown heartwood with lighter sapwood; subdued luster and moderate variation. It commonly darkens slightly amber-brown with age and light.
Hardness (Janka)
Approximately 1,360 lbf Janka — Hard.
Durability & Decay Resistance
Durable; generally good resistance to decay and insects, particularly when heartwood is used, though exposed end grain requires protection.
Value & Age
Rough white-oak turning stock commonly sells for about $8–$20 per board foot; figured or dry specialty stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The wood appears freshly worked or recently exposed; visible oxidation is limited, so the tree’s age cannot be estimated from this sample.
Common Uses
Furniture, flooring, cabinetry, barrels, interior joinery, timber framing, boatbuilding, turnings, and bowl blanks.
Geographic Origin
Eastern and central North America, especially the eastern United States and adjacent Canada.
Workability
Machines and turns well but is abrasive and can tear out around irregular grain; predrilling is advisable. It sands and glues reliably, though open pores need filling for a smooth finish.
Finish Recommendations
Sand progressively, seal end grain, and use oil, shellac, lacquer, or polyurethane. Fill the open pores if a glass-smooth surface is desired.
Notable Features
Distinctive ray fleck may appear on quartered surfaces; coarse pores and visible growth rings are characteristic. The sample contains knots, voids, and bark-edge defects.
