Most likely White Oak; alternatives include Red Oak or reclaimed oak.
Quercus alba (possible Quercus rubra) · Hardwood; possibly reclaimed or weathered oak.
AI-generated identification · may be incorrect- Type
- Hardwood; possibly reclaimed or weathered oak.
- Origin
- Eastern and central North America; commonly grown throughout the eastern United States and southeastern Canada.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard. Red Oak: about 1,290 lbf—Hard.
- Durability
- White Oak: Durable, with good rot resistance; Red Oak is Moderately Durable and less resistant to moisture.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Prominent, mostly straight grain with cathedral-like areas, elongated pores, and mild irregular figure; appears flat-sawn.
Color & Appearance
Weathered gray-brown to medium brown with darker streaks and subdued luster; likely originally pale tan. Oak generally ambers slightly with age and light.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard. Red Oak: about 1,290 lbf—Hard.
Durability & Decay Resistance
White Oak: Durable, with good rot resistance; Red Oak is Moderately Durable and less resistant to moisture.
Value & Age
Approximately $6–$14 per board foot for common clear white oak; reclaimed or figured material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Species age cannot be determined visually; surface appears aged or weathered, potentially several decades old, but could also be artificially distressed.
Common Uses
Flooring, furniture, cabinetry, paneling, barrels, veneer, boatbuilding, and general construction.
Geographic Origin
Eastern and central North America; commonly grown throughout the eastern United States and southeastern Canada.
Workability
Machines and sands well but can cause moderate planer tearout and blunting from its hardness; predrilling improves fastening, and gluing is generally reliable.
Finish Recommendations
Sand evenly, seal porous end grain, then use oil, hardwax oil, lacquer, or polyurethane; a conditioner or washcoat can reduce uneven staining.
Notable Features
Visible earlywood pores and strong grain are characteristic of oak; the sample lacks obvious medullary-ray fleck typical of quarter-sawn oak.
