Likely White Oak; alternatives include Red Oak or European Oak.
Quercus alba (likely); Quercus rubra or Quercus robur are alternatives. · Hardwood.
AI-generated identification · may be incorrect- Type
- Hardwood.
- Origin
- Eastern and central North America, especially the Appalachian and eastern United States; comparable European oak grows across Europe.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard.
- Durability
- Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and outdoor weathering still requires protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, linear grain with fine cathedral-like variation; appears flat-sawn or rift/quarter-adjacent. No notable decorative figure.
Color & Appearance
Pale tan to warm light brown with slightly darker heartwood and subtle sapwood contrast; moderate luster. It generally deepens toward honey-brown with light exposure.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; heartwood has good resistance to decay and insects, though sapwood is less resistant and outdoor weathering still requires protection.
Value & Age
Approximately US$6–12 per board foot for clear kiln-dried White Oak; figured or exceptionally wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated from the photograph; the clean surface and limited patina suggest a relatively new or recently refinished component.
Common Uses
Furniture, cabinetry, flooring, architectural panels, barrels, veneer, interior millwork, and boat components.
Geographic Origin
Eastern and central North America, especially the Appalachian and eastern United States; comparable European oak grows across Europe.
Workability
Generally machines and sands well, but its hardness can dull tools; quartered or irregular grain may produce tear-out. Pre-drilling is advisable, and gluing is typically straightforward.
Finish Recommendations
Use sanding sealer followed by oil, hardwax oil, lacquer, or polyurethane; water-based finishes preserve the pale tone, while oil warms it. Fill pores if a glass-smooth surface is desired.
Notable Features
Prominent open pores, strong dimensional character, and attractive ray fleck when quarter-sawn. The visible dark mark may be a small knot or mineral streak.
