Most likely poplar (also called tulip poplar/yellow-poplar); alternatives include basswood or aspen.
Likely Liriodendron tulipifera; alternatives Tilia americana or Populus spp. · Hardwood (deciduous), domestic North American.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous), domestic North American.
- Origin
- Eastern and southeastern North America, especially the Appalachian and lower Mississippi regions.
- Hardness
- Janka approximately 540 lbf—Soft.
- Durability
- Non-durable to slightly durable; limited resistance to decay, insects, and weathering when exposed.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and uniform with low-contrast growth bands; appears flat-sawn or plain-sawn, without notable figure.
Color & Appearance
Very pale gray-green to creamy white heartwood and lighter sapwood, with subdued luster; poplar often oxidizes toward olive, yellow, or brown.
Hardness (Janka)
Janka approximately 540 lbf—Soft.
Durability & Decay Resistance
Non-durable to slightly durable; limited resistance to decay, insects, and weathering when exposed.
Value & Age
Approximately $2–$5 per board foot for clear, kiln-dried poplar; specialty or wide stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- No reliable age estimate from this image; the surface appears relatively new or lightly weathered, with minor handling marks.
Common Uses
Paint-grade furniture, cabinetry, interior trim, drawer parts, toys, plywood cores, carving, and millwork.
Geographic Origin
Eastern and southeastern North America, especially the Appalachian and lower Mississippi regions.
Workability
Cuts, planes, sands, glues, and fastens easily, though soft fibers can dent and fuzzy surfaces may require careful sanding.
Finish Recommendations
For paint, seal end grain and use primer; for clear finish, apply sanding sealer followed by lacquer or waterborne polyurethane to reduce uneven absorption.
Notable Features
Lightweight, fine-textured, dimensionally stable, and commonly shows green, gray, or purple mineral streaks.