Most likely Douglas fir; alternatives include western larch or another construction-grade softwood.
Pseudotsuga menziesii · Softwood (gymnosperm/conifer)
AI-generated identification · may be incorrect- Type
- Softwood (gymnosperm/conifer)
- Origin
- Native to western North America, especially the Pacific Northwest and interior western ranges.
- Hardness
- Janka approximately 660 lbf — Soft.
- Durability
- Slightly Durable; heartwood has limited decay resistance and is not reliably insect- or weather-resistant without protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse grain with prominent earlywood/latewood bands; flat-sawn surfaces show subtle cathedral pattern. No notable decorative figure.
Color & Appearance
Heartwood is pinkish orange to reddish tan; sapwood is pale yellow-brown. Moderate luster; it typically darkens and warms with age and light.
Hardness (Janka)
Janka approximately 660 lbf — Soft.
Durability & Decay Resistance
Slightly Durable; heartwood has limited decay resistance and is not reliably insect- or weather-resistant without protection.
Value & Age
Approximately $3–$8 per board foot for ordinary surfaced construction-grade material; appearance-grade stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Appears freshly milled or recently installed construction lumber; visible staining and weather exposure suggest months to a few years, not reliably datable.
Common Uses
Framing lumber, beams, sheathing, trim, flooring, doors, plywood, and general construction.
Geographic Origin
Native to western North America, especially the Pacific Northwest and interior western ranges.
Workability
Machines and sands readily, though resin, knots, and pronounced grain can cause tearout; predrilling helps near ends. Glues and finishes well when clean and dry.
Finish Recommendations
Sand progressively, seal knots with shellac, then use penetrating oil, stain, lacquer, or polyurethane; exterior exposure requires a suitable protective coating.
Notable Features
Lightweight with strong strength-to-weight performance, conspicuous growth-ring contrast, and a mild resinous scent.