Most likely quarter-sawn oak, probably Red Oak; alternatives include White Oak or reclaimed oak veneer.
Quercus rubra (probable); Quercus alba is a plausible alternative. · Hardwood; likely solid or veneered, quarter-sawn/reclaimed furniture stock.
AI-generated identification · may be incorrect- Type
- Hardwood; likely solid or veneered, quarter-sawn/reclaimed furniture stock.
- Origin
- Eastern and central North America; widely plantation- and mill-grown in the United States.
- Hardness
- Red Oak: 1,290 lbf, Hard. White Oak: 1,360 lbf, Hard.
- Durability
- Red Oak: Slightly Durable outdoors; White Oak: Durable. Both resist wear well but are not reliably rot-resistant unless protected.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Strongly straight, linear quarter-sawn grain with prominent dark rays and flecking; no clear cathedral figure, suggesting radial or rift-oriented cutting.
Color & Appearance
Honey-golden to medium brown with darker brown grain lines and noticeable luster under finish. The darkened surface and oxidation suggest age or a tinted coating; oak generally deepens slightly with light.
Hardness (Janka)
Red Oak: 1,290 lbf, Hard. White Oak: 1,360 lbf, Hard.
Durability & Decay Resistance
Red Oak: Slightly Durable outdoors; White Oak: Durable. Both resist wear well but are not reliably rot-resistant unless protected.
Value & Age
Approximately $5–$12 per board foot for clear quarter-sawn oak; antique/reclaimed material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Exact age cannot be determined from this finished image; surface patina and wear suggest older furniture or reclaimed stock, possibly several decades old.
Common Uses
Furniture, flooring, cabinetry, paneling, veneer, stairs, and interior trim.
Geographic Origin
Eastern and central North America; widely plantation- and mill-grown in the United States.
Workability
Machines and sands well, though interlocked grain can tear out; predrilling is advisable and tannins may discolor iron fasteners.
Finish Recommendations
Clean and lightly abrade, then use dewaxed shellac, lacquer, or polyurethane; test compatibility if an old wax or unknown coating remains.
Notable Features
Visible medullary-ray fleck is characteristic of quarter-sawn oak; heavy, stiff, and wear-resistant.
