Most likely genuine mahogany; alternatives include sapele or darkened African mahogany.
Likely Swietenia macrophylla; alternatives: Entandrophragma cylindricum or Khaya spp. · Hardwood; commonly classified as tropical/exotic.
AI-generated identification · may be incorrect- Type
- Hardwood; commonly classified as tropical/exotic.
- Origin
- Central and South America, especially the Amazon and Caribbean regions; plantation material is also grown elsewhere.
- Hardness
- Approximately 900 lbf Janka (Medium); species and source can vary considerably.
- Durability
- Moderately Durable to Durable; generally good resistance to decay and insects, though not uniformly weatherproof.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, with fine, diffuse pores and subtle ribboning or interlock; no obvious decorative figure. The visible face appears flat- or quarter-sawn.
Color & Appearance
Reddish-brown to medium chocolate-brown heartwood with lighter brown sapwood and moderate luster. It typically darkens and reddens with light exposure.
Hardness (Janka)
Approximately 900 lbf Janka (Medium); species and source can vary considerably.
Durability & Decay Resistance
Moderately Durable to Durable; generally good resistance to decay and insects, though not uniformly weatherproof.
Value & Age
About $8–$20 per board foot for common genuine mahogany; figured or legally documented premium stock may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Not reliably determinable from this image; the surface shows limited oxidation and wear, suggesting a relatively recent or refinished piece.
Common Uses
Fine furniture, cabinetry, doors, boat interiors, architectural millwork, musical instruments, veneer, and turning.
Geographic Origin
Central and South America, especially the Amazon and Caribbean regions; plantation material is also grown elsewhere.
Workability
Generally easy to saw, plane, rout, sand, glue, and finish; interlocked grain may cause localized tear-out, and silica or mineral deposits can blunt tools.
Finish Recommendations
Use a penetrating oil, shellac, lacquer, or clear polyurethane after thorough sanding; a wash coat or sealer can even absorption and reduce blotching.
Notable Features
Lightweight for its strength, dimensionally stable, warm reddish color, and often naturally lustrous; faint ribbon figure may appear on quartered stock.
