Most likely poplar/aspen; alternatives include basswood or soft maple.
Likely Populus spp.; exact species cannot be confirmed from this single face-grain image. · Hardwood (angiosperm/deciduous), likely domestic temperate species.
AI-generated identification · may be incorrect- Type
- Hardwood (angiosperm/deciduous), likely domestic temperate species.
- Origin
- Poplars and aspens are native across North America, Europe, and parts of Asia; commercial stock commonly comes from North America and Europe.
- Hardness
- Approximately 300–540 lbf, ranging from Very Soft to Soft depending on species.
- Durability
- Non-durable to Slightly Durable; generally vulnerable to decay, moisture, and insects when exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine, and diffuse-textured with subtle growth bands; flat-sawn face shows mild linear streaking and no notable figure.
Color & Appearance
Pale creamy white to light tan with slightly darker gray-brown streaks; low luster and modest color variation. It may yellow or warm slightly with age and light.
Hardness (Janka)
Approximately 300–540 lbf, ranging from Very Soft to Soft depending on species.
Durability & Decay Resistance
Non-durable to Slightly Durable; generally vulnerable to decay, moisture, and insects when exposed outdoors.
Value & Age
About $2–$5 per board foot for common clear stock; specialty poplar or basswood may differ.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be estimated reliably; the clean, lightly weathered surface suggests recently milled or minimally aged wood.
Common Uses
Paint-grade furniture, cabinetry interiors, boxes, crates, plywood, carving, and paper products.
Geographic Origin
Poplars and aspens are native across North America, Europe, and parts of Asia; commercial stock commonly comes from North America and Europe.
Workability
Easy to saw, plane, rout, sand, glue, and fasten, though soft fibers can dent, fuzz, or compress and may tear slightly when machining.
Finish Recommendations
Use sanding sealer or conditioner before stain to reduce blotching; paint, lacquer, shellac, oil, or polyurethane all work well.
Notable Features
Lightweight, relatively stable, pale, and commonly used where paint or low cost matters; limited natural figure is visible.
