Most likely Amboyna burl (alternatives: walnut burl or maple burl)
Pterocarpus indicus (likely; alternatives: Juglans spp. or Acer spp.) · Hardwood; exotic/tropical figured burl
AI-generated identification · may be incorrect- Type
- Hardwood; exotic/tropical figured burl
- Origin
- Primarily Southeast Asia and the Pacific region, especially Indonesia and the Philippines.
- Hardness
- Approximately 1,500–1,700 lbf; Hard (estimated for Amboyna).
- Durability
- Moderately Durable; generally resistant to decay, though burl surfaces and cracks require protection.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Highly irregular burl figure with dense swirling, short grain, and mottled quilt-like patterns; live edges are present.
Color & Appearance
Warm tan to reddish-brown heartwood with darker streaks and subdued luster; burl figure may show chatoyance, typically darkening slightly with light exposure.
Hardness (Janka)
Approximately 1,500–1,700 lbf; Hard (estimated for Amboyna).
Durability & Decay Resistance
Moderately Durable; generally resistant to decay, though burl surfaces and cracks require protection.
Value & Age
Approximately $30–$100+ per board foot for attractive Amboyna burl, depending heavily on figure, size, and defects.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably determined visually; it appears relatively fresh and workshop-cut, with no dependable patina evidence.
Common Uses
Small boxes, knife scales, turnings, jewelry, veneers, panels, and decorative inlays.
Geographic Origin
Primarily Southeast Asia and the Pacific region, especially Indonesia and the Philippines.
Workability
Cuts and sands reasonably well but has severely unpredictable grain, tearout, voids, and inclusions; sharp tools and slow passes are essential. Stabilization may be needed for fragile areas.
Finish Recommendations
Seal voids with thin cyanoacrylate or clear epoxy, then use lacquer, shellac, or wiping polyurethane; sanding sealer can reduce uneven absorption.
Notable Features
Distinctive burl figure, live edges, voids, and strong visual variation; individual pieces can differ substantially.
