Most likely Eastern White Pine; alternatives include Western White Pine or Sugar Pine.
Pinus strobus (most likely) · Softwood (conifer); likely clear, flat-sawn boards.
AI-generated identification · may be incorrect- Type
- Softwood (conifer); likely clear, flat-sawn boards.
- Origin
- Native to eastern North America, especially the northeastern United States and southeastern Canada.
- Hardness
- Janka approximately 380 lbf—Very Soft.
- Durability
- Slightly Durable; generally susceptible to decay, moisture damage, and insects when exposed outdoors.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine grain with visible annual growth lines, occasional small knots and mild cathedral figure; no distinctive decorative figure.
Color & Appearance
Pale cream to yellowish-white heartwood and lighter sapwood, with subtle resin streaking. It typically deepens to warm golden yellow or amber with light exposure.
Hardness (Janka)
Janka approximately 380 lbf—Very Soft.
Durability & Decay Resistance
Slightly Durable; generally susceptible to decay, moisture damage, and insects when exposed outdoors.
Value & Age
Approximately $3–$8 per board foot for ordinary clear/select stock; figured or exceptionally clear material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears relatively new or lightly aged; surface staining and oxidation are insufficient to establish a calendar age.
Common Uses
Interior trim, furniture, cabinetry, shelving, patternmaking, doors, boxes, carving, and general construction lumber.
Geographic Origin
Native to eastern North America, especially the northeastern United States and southeastern Canada.
Workability
Very easy to cut, plane, sand, glue, and fasten, though its softness causes dents and screws may strip. Resin pockets and knots can cause localized tear-out or finish bleed.
Finish Recommendations
Sand carefully, use a pre-stain conditioner or washcoat to reduce blotching, then apply shellac, lacquer, oil, or polyurethane; lightly seal resinous knots first.
Notable Features
Lightweight, soft, dimensionally stable, and usually faintly resinous; the image shows knots and a small localized grain distortion.
