Most likely American mahogany; alternatives include sapele or Philippine mahogany.
Swietenia macrophylla (likely); alternatives: Entandrophragma cylindricum or Shorea spp. · Hardwood; tropical/exotic.
AI-generated identification · may be incorrect- Type
- Hardwood; tropical/exotic.
- Origin
- Native to tropical Central and South America; widely plantation-grown in tropical regions.
- Hardness
- Approximately 900 lbf Janka—Medium.
- Durability
- Moderately durable; generally good rot resistance, though sapwood is less resistant and susceptible to insects.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight to mildly interlocked, with subtle ribboning and cathedral-like growth bands; quarter-sawn areas may show slight stripe figure.
Color & Appearance
Salmon pink to reddish-brown heartwood with paler sapwood; typically darkens to warm reddish brown and develops moderate luster with light exposure.
Hardness (Janka)
Approximately 900 lbf Janka—Medium.
Durability & Decay Resistance
Moderately durable; generally good rot resistance, though sapwood is less resistant and susceptible to insects.
Value & Age
About $8–$18 per board foot for ordinary kiln-dried stock; premium clear or figured material may cost more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from the photograph; the clean, freshly machined surface suggests recently worked stock rather than aged timber.
Common Uses
Furniture, cabinetry, doors, trim, boat interiors, musical instruments, veneer, and turning.
Geographic Origin
Native to tropical Central and South America; widely plantation-grown in tropical regions.
Workability
Generally machines, sands, glues, and finishes well; interlocked grain can tear out during planing, and silica or mineral inclusions may dull tools.
Finish Recommendations
Seal end grain, then use oil, shellac, lacquer, or polyurethane; sanding to 180–220 grit typically produces an even finish.
Notable Features
Lightweight for its strength, stable, easily machined, and often faintly aromatic; attractive understated ribboning may appear after finishing.
