Most likely White Oak; alternatives include Red Oak or reclaimed oak.
Quercus alba (likely); Quercus rubra possible. · Hardwood; possibly reclaimed or weathered stock.
AI-generated identification · may be incorrect- Type
- Hardwood; possibly reclaimed or weathered stock.
- Origin
- Eastern and central North America; commonly milled throughout the United States.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard.
- Durability
- Durable; good natural resistance to decay and insects, especially heartwood, though the weathered surface is not proof of current structural condition.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, fine-to-medium grain with visible horizontal ray fleck and broad, flat-sawn cathedral variation; no clear decorative figure.
Color & Appearance
Weathered gray-brown surface with muted tan heartwood and lighter sapwood; likely originally pale brown. Freshly exposed oak typically darkens slightly to golden brown.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; good natural resistance to decay and insects, especially heartwood, though the weathered surface is not proof of current structural condition.
Value & Age
Approximately $5–$12 per board foot for ordinary surfaced White Oak; reclaimed or select stock may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated from this image; surface oxidation, staining, and wear suggest older or reclaimed stock, but not necessarily antique.
Common Uses
Furniture, flooring, cabinetry, joinery, barrels, beams, veneer, and general construction.
Geographic Origin
Eastern and central North America; commonly milled throughout the United States.
Workability
Machines and sands well, but dense grain can cause moderate tool wear and occasional tear-out. Pre-drilling is advisable; gluing and finishing are generally straightforward.
Finish Recommendations
Remove weathered fibers by scraping or sanding, then use oil, shellac, lacquer, or polyurethane. A conditioner or washcoat can help even color on unevenly absorbent areas.
Notable Features
Visible medullary-ray fleck supports oak identification; coarse pores and strong tannin content are also characteristic, though end grain is not shown clearly.
