Most likely quartersawn oak, probably White Oak; alternatives include Red Oak or reclaimed oak veneer.
Quercus alba (probable); Quercus rubra is a possible alternative. · Hardwood; apparently antique/reclaimed solid oak or oak veneer.
AI-generated identification · may be incorrect- Type
- Hardwood; apparently antique/reclaimed solid oak or oak veneer.
- Origin
- Eastern and central North America; White Oak is especially common in the eastern United States.
- Hardness
- White Oak: about 1,360 lbf—Hard. Red Oak: about 1,290 lbf—Hard.
- Durability
- White Oak is Durable; good resistance to decay and insects, especially heartwood. Red Oak is generally only Moderately Durable.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Strongly linear, quartersawn grain with prominent medullary-ray fleck and dark age-related streaking; no clear decorative figure beyond ray structure.
Color & Appearance
Originally pale tan to golden brown, now dark brown with amber oxidation, patina, and finish discoloration. Sapwood appears lighter; moderate luster is visible.
Hardness (Janka)
White Oak: about 1,360 lbf—Hard. Red Oak: about 1,290 lbf—Hard.
Durability & Decay Resistance
White Oak is Durable; good resistance to decay and insects, especially heartwood. Red Oak is generally only Moderately Durable.
Value & Age
Approximately $6–$15 per board foot for ordinary surfaced oak; figured or authentic antique reclaimed material may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The darkened finish, wear, and surface checking suggest several decades of age, possibly 50–100+ years, but the wood itself cannot be dated visually.
Common Uses
Furniture, cabinetry, flooring, architectural panels, barrels, veneer, and restoration work.
Geographic Origin
Eastern and central North America; White Oak is especially common in the eastern United States.
Workability
Machines and sands well, though quartersawn ray areas can chip and end grain may split. Pre-drilling is advisable; tannins can react with iron and some finishes.
Finish Recommendations
Clean gently, test for existing finish, then use dewaxed shellac, oil, lacquer, or satin polyurethane; avoid aggressive stripping if patina is valuable.
Notable Features
Prominent oak ray fleck, heavy visible grain, substantial density, and likely old finish/patina.
