Most likely tropical hardwood flooring or trim; possible genuine mahogany, with dark-stained oak or walnut as alternatives.
Swietenia macrophylla (tentative); alternatives Quercus spp. or Juglans nigra. · Hardwood; likely exotic/tropical if mahogany.
AI-generated identification · may be incorrect- Type
- Hardwood; likely exotic/tropical if mahogany.
- Origin
- Central and South America, especially Mexico through the Amazon basin, if mahogany.
- Hardness
- Big-leaf mahogany: about 800–1,070 lbf, Soft to Medium; oak or walnut alternatives would be harder.
- Durability
- Mahogany: Moderately Durable against decay, with moderate insect resistance; unfinished weathering reduces its service life.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, narrow grain with mild irregularity and longitudinal dark streaking; no clear decorative figure. The visible face appears flat-sawn or ripsawn.
Color & Appearance
Deep reddish-brown to chocolate brown with darker weathered areas and subdued luster, likely enhanced by stain or oxidation. Mahogany commonly darkens and reddens with light exposure.
Hardness (Janka)
Big-leaf mahogany: about 800–1,070 lbf, Soft to Medium; oak or walnut alternatives would be harder.
Durability & Decay Resistance
Mahogany: Moderately Durable against decay, with moderate insect resistance; unfinished weathering reduces its service life.
Value & Age
Common mahogany: roughly $8–$18 per board foot; figured or premium stock may be higher.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be reliably dated photographically; surface patina and wear suggest an older finished or reclaimed piece, possibly decades old.
Common Uses
Furniture, cabinetry, trim, doors, boat components, flooring, turning, and veneer.
Geographic Origin
Central and South America, especially Mexico through the Amazon basin, if mahogany.
Workability
Generally machines, sands, glues, and finishes well, though interlocked grain can tear out and silica or dirt may dull tools. Pre-drilling is advisable for fasteners.
Finish Recommendations
Clean and lightly sand, then use a sealer followed by lacquer, shellac, or polyurethane; penetrating oil can deepen the brown-red color.
Notable Features
Warm reddish color, relatively stable movement, and occasional ribbon figure; the image does not show diagnostic end grain or scent.
