Most likely reclaimed oak, probably White Oak; alternatives include Red Oak or chestnut oak.
Quercus alba (probable); Quercus rubra or Quercus montana are alternatives. · Hardwood; apparently reclaimed or salvaged, rough-sawn boards.
AI-generated identification · may be incorrect- Type
- Hardwood; apparently reclaimed or salvaged, rough-sawn boards.
- Origin
- Eastern and central North America; white oak is widespread from the Northeast to the Southeast and Midwest.
- Hardness
- White Oak: about 1,360 lbf Janka—Hard; Red Oak: about 1,290 lbf—Hard.
- Durability
- White Oak is Durable, with good rot resistance; Red Oak is Moderately Durable and less weather-resistant. Insect resistance is variable.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse grain with pronounced cathedral-like areas, irregular knots, splits, and possible insect damage; cut orientation varies.
Color & Appearance
Weathered tan to medium brown with darker streaks and gray-brown oxidation; sapwood/heartwood distinction is unclear. Freshly exposed surfaces would likely darken modestly with age.
Hardness (Janka)
White Oak: about 1,360 lbf Janka—Hard; Red Oak: about 1,290 lbf—Hard.
Durability & Decay Resistance
White Oak is Durable, with good rot resistance; Red Oak is Moderately Durable and less weather-resistant. Insect resistance is variable.
Value & Age
Rough reclaimed oak commonly sells for approximately $8–$25 per board foot, depending on dimensions, dryness, provenance, and usable yield.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The boards’ surface weathering and heavy wear suggest years to decades of exposure or reuse, but sample age cannot be determined reliably from photographs.
Common Uses
Furniture, flooring, cabinetry, beams, barrels, trim, tool handles, and reclaimed architectural work.
Geographic Origin
Eastern and central North America; white oak is widespread from the Northeast to the Southeast and Midwest.
Workability
Generally machines and glues well, though knots, embedded grit, checks, and irregular grain may cause tear-out and rapidly dull blades. Pre-drilling is advisable.
Finish Recommendations
Remove dirt and metal, test for contamination, then plane or sand; use oil, shellac, lacquer, or polyurethane. A washcoat or sanding sealer can moderate uneven absorption.
Notable Features
Coarse open-pored texture, prominent rays may appear on quartered areas, and the irregularity is consistent with salvaged oak rather than new clear stock.
