Most likely lacewood (possibly Australian silky oak); alternatives include leopardwood or figured sycamore.
Likely Cardwellia sublimis; alternative Grevillea robusta or Roupala brasiliensis. · Hardwood; commonly classified as exotic/tropical in the marketplace.
AI-generated identification · may be incorrect- Type
- Hardwood; commonly classified as exotic/tropical in the marketplace.
- Origin
- Lacewood is native to eastern Australia, especially Queensland and New South Wales.
- Hardness
- About 1,780 lbf Janka for lacewood—Hard; exact value varies substantially among alternatives.
- Durability
- Moderately durable; limited resistance to decay and insects compared with naturally durable outdoor woods.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Mostly straight, with prominent flecked/ray figure resembling small elongated spots; likely quarter- or rift-sawn. The end grain is not sufficiently visible for confirmation.
Color & Appearance
Medium reddish-brown to gray-brown heartwood with darker streaking and lighter flecks; moderate luster. It may darken and become browner with light exposure.
Hardness (Janka)
About 1,780 lbf Janka for lacewood—Hard; exact value varies substantially among alternatives.
Durability & Decay Resistance
Moderately durable; limited resistance to decay and insects compared with naturally durable outdoor woods.
Value & Age
Approximately $12–$30 per board foot for clear figured stock, varying by species, thickness, and figure intensity.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- Cannot be determined from a photograph; the clean edges and limited patina suggest a relatively recent milled sample rather than visibly aged reclaimed wood.
Common Uses
Decorative furniture, cabinetry, veneer, paneling, turning, small boxes, knife scales, and musical-instrument components.
Geographic Origin
Lacewood is native to eastern Australia, especially Queensland and New South Wales.
Workability
Generally machines and sands well, though figured areas can tear out; use sharp cutters and a light finishing cut. Gluing and finishing are usually straightforward.
Finish Recommendations
Seal with dewaxed shellac or a compatible sanding sealer, then apply clear lacquer, oil, or wiping polyurethane. A light stain is usually unnecessary and may obscure the figure.
Notable Features
Highly distinctive ray/fleck figure, moderate weight, and decorative chatoyance when viewed across the grain.