Most likely White Oak; alternatives include Red Oak or Chestnut Oak.
Quercus alba (likely); Quercus rubra is a secondary possibility. · Hardwood (deciduous), domestic North American.
AI-generated identification · may be incorrect- Type
- Hardwood (deciduous), domestic North American.
- Origin
- Eastern and central North America, especially the eastern United States.
- Hardness
- About 1,360 lbf Janka—Hard.
- Durability
- Durable; white oak heartwood has good decay and moisture resistance, with moderate insect resistance, though exposed checks can admit rot.
Got a wood sample like this?
Identify any wood from a photo, free.
Grain Pattern
Predominantly straight, coarse open-pored grain with cathedral-like flatsawn variation and minor irregularity around knots/checks; no distinctive figure visible.
Color & Appearance
Pale tan to light brown heartwood with slightly lighter sapwood, subdued luster, and darker streaking around defects. It typically amber-browns modestly with age and light.
Hardness (Janka)
About 1,360 lbf Janka—Hard.
Durability & Decay Resistance
Durable; white oak heartwood has good decay and moisture resistance, with moderate insect resistance, though exposed checks can admit rot.
Value & Age
Approximately $6–$12 per board foot for ordinary kiln-dried white oak; premium clear or quarter-sawn stock costs more.
AI estimate for general guidance only — not a professional appraisal. Actual value depends on grade, dimensions, condition, and local market demand.
- Wood Age Estimate
- The board appears recently milled or lightly weathered; visible oxidation and checking suggest months to several years, not reliably an antique sample.
Common Uses
Furniture, flooring, cabinetry, barrels, interior trim, construction, boatbuilding, turning, and veneer.
Geographic Origin
Eastern and central North America, especially the eastern United States.
Workability
Machines and sands well but is abrasive and can tear out near irregular grain; predrilling is advisable. Glues and finishes reliably.
Finish Recommendations
Use a sanding sealer followed by oil, lacquer, shellac, or polyurethane. Water-based finishes may raise the grain; test for desired color.
Notable Features
Open pores, prominent medullary rays when quarter-sawn, substantial weight, and characteristic oak ray fleck; visible knots and checks reduce grade.
